Isolation of oxidative degradation products of atorvastatin with supercritical fluid chromatography

The isolation of four oxidative degradation products of atorvastatin using preparative high‐performance liquid chromatography applying at least two chromatographic steps is known from the literature. In this paper it is shown that the same four impurities could be isolated from similarly prepared mixtures in only one step using supercritical fluid chromatography. The methods for separation were developed and optimized. The preparation of the mixtures was altered in such a way as to enhance the concentration of desired impurities. Appropriate solvents were applied for collection of separated impurities in order to prevent degradation. The structures of the isolated impurities were confirmed and their purity determined. The preparative supercritical fluid chromatography has proven to be superior to preparative HPLC regarding achieved purity of standards applying fewer chromatographic as well as isolation steps. Copyright © 2015 John Wiley & Sons, Ltd.     

Simultaneous quantification of leukotrienes and hydroxyeicosatetraenoic acids in cell culture medium using liquid chromatography/tandem mass spectrometry

Leukotrienes (LTs) and hydroxyeicosatetraenoic acids (HETEs) are important bioactive lipid mediators that participate in various pathophysiological processes. To advance understanding of the mechanisms that regulate these mediators in physiological and pathological processes, an analytical method using liquid chromatography/tandem mass spectrometry for the simultaneous quantification of LTB₄, LTC₄, LTD₄, LTE₄, 5‐HETE_, 8‐HETE, 12‐HETE and 15‐HETE in cell culture media was developed. A Supel?‐Select HLB solid‐phase extraction cartridge was used for sample preparation. The compounds were separated on a C₁₈ column using gradient elution with acetonitrile–water–formic acid (20:80:0.1, v/v/v) and acetonitrile–formic acid (100:0.1, v/v). The calibration curves of LTB₄, LTD₄, LTE₄ and HETEs were linear in the range of 0.025–10 ng/mL, and the calibration curve of LTC₄ was linear in the range of 0.25–10 ng/mL. Validation assessment showed that the method was highly reliable with good accuracy and precision. The stability of LTs and HETEs was also investigated. Using the developed method, we measured LTs and HETEs in the culture supernatant of the human mast cell line HMC‐1. The present method could facilitate investigations of the mechanisms that regulate the production, release and signaling of LTs and HETEs. Copyright © 2014 John Wiley & Sons, Ltd.     

Facile preparation of boronic acid‐functionalized magnetic nanoparticles with a high capacity and their use in the enrichment of cis‐diol‐containing compounds from plasma

The use of bronate affinity adsorbents is a new separation method that appeared recently with great potential for specific extraction of cis‐diol‐containing compounds. In this work,a new strategy for the facile construction of boronic acid‐functionalized Fe₃O₄ magnetic nanoparticles (Fe₃O₄@FPBA MNPs) with a high capacity was described. The extraction capacity of the Fe₃O₄@FPBA MNPs was determined to be 66.0 ± 2.7 µmol/g for catechol and 80.6 ± 2.0 µmol/g for dopamine, being higher than that for the reported methods. The Fe₃O₄@FPBA MNPs were used to extract four cis‐diol drugs: caffeic acid isopropyl ester, caffic acid bornyl ester, isopropyl 3‐(3,4‐dihydroxyphenyl)‐2‐hydroxypropanoate and 3‐(3, 4‐dihydroxyphenyl)‐2‐hydroxylpropionic acid – from the spiked rabbit plasma, and the recoveries of four drugs were between 87.29 and104.37% with relative standard deviations ranging from 1.34 to 8.81%. Under the most favorable conditions, the solid‐phase extraction combined with HPLC‐UV for the analysis of four drugs in plasma could eliminate interferences from endogenous components of the biological fluids and exhibited sufficient precision and accuracy. These results showed that the prepared Fe₃O₄@FPBA MNPs were qualified for efficiently enriching and determining the trace cis‐diol substances from biological samples. Copyright © 2014 John Wiley & Sons, Ltd.     

A sensitive and efficient method for trace analysis of some phenolic compounds using simultaneous derivatization and air‐assisted liquid–liquid microextraction from human urine and plasma samples followed by gas chromatography–nitrogen phosphorous detection

In present study, a simultaneous derivatization and air‐assisted liquid–liquid microextraction method combined with gas chromatography–nitrogen phosphorous detection has been developed for the determination of some phenolic compounds in biological samples. The analytes are derivatized and extracted simultaneously by a fast reaction with 1‐flouro‐2,4‐dinitrobenzene under mild conditions. Under optimal conditions low limits of detection in the range of 0.05–0.34 ng mL^?1 are achievable. The obtained extraction recoveries are between 84 and 97% and the relative standard deviations are less than 7.2% for intraday (n = 6) and interday (n = 4) precisions. The proposed method was demonstrated to be a simple and efficient method for the analysis of phenols in biological samples. Copyright © 2015 John Wiley & Sons, Ltd.     

D3h‐Symmetric Porphyrin‐Based Rigid Macrocyclic Ligands for Multicofacial Multinuclear Complexes in a One‐Nanometer‐Sized Cavity

The one‐step synthesis of D_3h‐symmetric cyclic porphyrin trimers 1 composed of three 2,2′‐[4,4′‐bis(methoxycarbonyl)]bipyridyl moieties and three porphyrinatozinc moieties was achieved from a nickel‐mediated reductive coupling of meso‐5,15‐bis(6‐chloro‐4‐methoxycarbonylpyrid‐2‐yl)porphyrinatozinc. Although cyclic trimers 1 were obtained as a mixture that included other cyclic and acyclic porphyrin oligomers, an extremely specific separation was observed only for cyclic trimers 1 when using columns of silica gel modified with pyrenylethyl, cyanopropyl, and other groups. Structural analysis of cyclic trimers 1 was carried out by means of NMR spectroscopy and X‐ray crystallography. Treatment of an η³‐allylpalladium complex with a cyclic trimer gave a tris(palladium) complex containing three η³‐allylpalladium groups inside the space, which indicated that the bipyridyl moieties inside the ring could work as bidentate metalloligands.     

Facile LC‐UV methods for simultaneous monitoring of ciprofloxacin and rosuvastatin in API,formulations and human serum

An efficient, selective and cost‐effective liquid chromatographic assay was developed and validated for the simultaneous quantification of ciprofloxacin and rosuvastatin in Active Pharmaceutical Ingredients (API), pharmaceutical formulations and in human serum. The chromatographic system consisted of mobile phase methanol–water, 90:10 v/v at pH 3.0 adjusted with o‐phosphoric acid, pumped at 1.0 mL/min through a prepacked Purospher Star C18 (5 µm, 25 × 0.46 cm) column and effluent was monitored at the isosbestic point (255 nm) as well as at the λ_max of individual drugs (243 and 271 nm). The method was validated over a linear concentration range of 0.25–15 µg/mL for ciprofloxacin and 0.33–20 µg/mL for rosuvastatin (r² ≥ 0.999). The ranges of reliable response (limits of detection and quantitation) for ciprofloxacin were 3–15 and 9–45 ng/mL and 17–29 and 52–88 ng/mL, respectively, for rosuvastatin in all API, pharmaceutical formulations and human serum. Analytical recovery from human serum was >98% and relative standard deviation (RSD) was <2. The accuracies were 97.13–102.55 and 97.41–101.31% and precisions in RSD were 0.04–1.90 and 0.02–1.23% for ciprofloxacin and rosuvastatin, respectively. No matrix interferences, ion suppression/enhancement and carry‐over were detected. The total assay run time was less than 5 min. In another study, for optimum performance the detector was programmed for multiwavelength scanning at the absorption maxima of each component. Consequently, the linearity range was improved and limit of detection and quantitation values were down to 1–4 and 4–12 ng/mL for ciprofloxacin and 3–5 and 9–15 ng/mL for rosuvastatin, respectively. The validation parameters fitted ICH guidelines through the isosbestic and individual λ_max approach. The small sample volume and simplicity of preparation make this method suitable for use in human serum samples, pharmaceutical formulations, quality control, drug–drug interaction studies, clinical laboratories, drug research centers and forensic medical centers. Copyright © 2014 John Wiley & Sons, Ltd.     

Design and development of a two‐dimensional system based on hydrophilic and reversed‐phase liquid chromatography with on‐line sample treatment for the simultaneous separation of excreted xenobiotics and endogenous metabolites in urine

In the present work we describe a two‐dimensional liquid chromatographic system (2D‐LC) with detection by mass spectrometry (MS) for the simultaneous separation of endogenous metabolites of clinical interest and excreted xenobiotics deriving from exposure to toxic compounds. The 2D‐LC system involves two orthogonal chromatographic modes, hydrophilic interaction liquid chromatography (HILIC) to separate polar endogenous metabolites and reversed‐phase (RP) chromatography to separate excreted xenobiotics of low and intermediate polarity. Additionally, the present proposal has the novelty of incorporating an on‐line sample treatment based on the use of restricted access materials (RAMs), which permits the direct injection of urine samples into the system. The work is focused on the instrumental coupling, studying all possible options and attempting to circumvent the problems of solvent incompatibility between the RAM device and the two chromatographic columns, HILIC and RP. The instrumental configuration developed, RAM‐HILIC‐RPLC‐MS/MS, allows the simultaneous assessment of urinary metabolites of clinical interest and excreted compounds derived from exposure to toxic agents with minimal sample manipulation. Thus, it may be of interest in areas such as occupational and environmental toxicology in order to explore the possible relationship between the two types of compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

Resolution and isolation of enantiomers of (±)‐isoxsuprine using thin silica gel layers impregnated with l‐glutamic acid,comparison of separation of its diastereomers prepared with chiral derivatizing reagents having l‐amino acids as chiral auxiliaries

Thin silica gel layers impregnated with optically pure l ‐glutamic acid were used for direct resolution of enantiomers of (±)‐isoxsuprine in their native form. Three chiral derivatizing reagents, based on DFDNB moiety, were synthesized having l ‐alanine, l ‐valine and S‐benzyl‐l ‐cysteine as chiral auxiliaries. These were used to prepare diastereomers under microwave irradiation and conventional heating. The diastereomers were separated by reversed‐phase high‐performance liquid chromatography on a C₁₈ column with detection at 340 nm using gradient elution with mobile phase containing aqueous trifluoroacetic acid and acetonitrile in different compositions and by thin‐layer chromatography (TLC) on reversed phase (RP) C₁₈ plates. Diastereomers prepared with enantiomerically pure (+)‐isoxsuprine were used as standards for the determination of the elution order of diastereomers of (±)‐isoxsuprine. The elution order in the experimental study of RP‐TLC and RP‐HPLC supported the developed optimized structures of diastereomers based on density functional theory. The limit of detection was 0.1–0.09 µg/mL in TLC while it was in the range of 22–23 pg/mL in HPLC and 11–13 ng/mL in RP‐TLC for each enantiomer. The conditions of derivatization and chromatographic separation were optimized. The method was validated for accuracy, precision, limit of detection and limit of quantification. Copyright © 2014 John Wiley & Sons, Ltd.     

Behavior of poly(ε-caprolactone)-based diblock copolymers in a bulk state and in solution

Abstract

A series of amphiphilic MOPEO-b-PCL copolymers (DBCs), based on biocompatible methoxypoly(ethylene oxide) with M_n=4.5?kDa and poly(ε-caprolactone) of a variable chain length, was synthesized by an anionic ring-opening block copolymerization. The structural investigations, performed by DSC and WAXS methods, revealed the microphase separation in DBC bulk structure and the existence of separate amorphous regions and microcrystalline domains of MOPEO and PCL blocks. Spectrophotometry and SLS were used to study the self-assembling of DBC macromolecules in selective dioxane/aqueous solution and to determine the main micellization parameters (CMC and -ΔG°). The DBC micelles morphology and their specific aggregation in mixed solvent were shown.